Read This Before You Finish Your Concrete Interior Walls

Concrete finish interior walls not only look attractive but are strong and long lasting too. But there are certain areas that need to be fixed in with these walls before the final finishing is performed. If you are wondering how to fix the final steps, then here is the right resolute for you in the form of tips and tricks. 

Concrete Finish Interior Walls in Dubai : SDS

Make sure to follow these to get the best results;

Check for the moisture – Before getting the final finishing of concrete finish interior walls, it is very important to check for the moisture content. Or else, the entire hard work and amount spent will go in vain. Plus it will be challenging to get the final and smooth finishing of the wall as well. With moisture, water problems, leakage etc. will call out and can create severe problems in the future especially during the rainy season. 

Blocking joints – To affix the interior concrete walls, it is imperative to support the same with blocking joints. This process can be done with simple drills as well. Or else. Take the help of a professional if needed. 

Talk to an expert – An industry expert or the professional in the field will be the right person to help you with the things to do and avoid during the final finishes. It is a better idea to connect with an expert and take the final decision before performing the steps. 

Use foam sheets – This will help you in providing an extra layer of insulation for the concrete finish interior walls. But before doing this, ensure checking with the moisture content, or it will not show rightful effects. Installing a foam sheet is very easy as it can be done just by applying adhesive in the vertical direction. 

Corners – Check for the corners with respect to its smoothness. Here your motto should be based on to identify the holes if any. It will avoid overlapping and unwanted surface. The edging should be done in such a way that there is less or no chance of cracking at all. 

Broom finish – This technique enables the walls to enhance its resistance power, small ridges, traction control, and likewise. This technique is used for floors but is now being used for concrete walls as well. 

Take these points into strict consideration for concrete finish interior walls. This way there will be no or minimal chances of damages or any ridges. Get in touch with SDS Me now for more details.